FRIDERIC Series · All-PositionLong-Haul Highway

FA808

FRIDERIC FA808 all-position all-steel radial tyre — Long Haul pattern. PR 18, Speed M. Fitment: 11R22.5 · 12R22.5.

FRIDERIC
Construction All-Steel Radial
Rim Size 22.5″ Rim
Axle All-Position
Ply Rating PR18
FRIDERIC FA808 1
Technical Specifications

Available Sizes

Manufactured at our Guangrao, Shandong plant. Contact us for OEM pattern and size requests.

Part No.SizeStd. RimPRSpeedTread DepthLoad Index
FA808-700R16LT-PR147.00R16LT5.50F14L · 120 km/h12 mm118/114
FA808-750R16LT-PR147.50R16LT6.00G14M · 130 km/h12 mm122/118
FA808-825R16LT-PR168.25R16LT6.50H16M · 130 km/h12 mm128/124
FA808-825R20-PR168.25R206.516L · 120 km/h13 mm139/137
FA808-900R20-PR169.00R20716L · 120 km/h15.5 mm144/142
FA808-1000R20-PR1810.00R207.518L · 120 km/h15.5 mm149/146
FA808-11R225-PR1411R22.58.2514M · 130 km/h15 mm144/142
FA808-11R225-PR1611R22.58.2516M · 130 km/h15 mm146/143
FA808-11R245-PR1411R24.58.2514M · 130 km/h15 mm146/143
FA808-11R245-PR1611R24.58.2516M · 130 km/h15 mm149/146
FA808-1200R24-PR2012.00R248.520L · 120 km/h14 mm160/157
FA808-13R225-PR1813R22.59.7518L · 120 km/h16.5 mm154/151
FA808-25570R225-PR14255/70R22.57.514M · 130 km/h13 mm138/134
FA808-25570R225-PR16255/70R22.57.516M · 130 km/h13 mm140/137
FA808-31580R225-PR20315/80R22.5920M · 130 km/h14.5 mm156/153
← Swipe to see all columns →
Performance Profile

Versatile across
the duty cycle

Steering Stability
 
9.0
Load Capacity
 
9.4
Tear Resistance
 
9.3
Anti-Sideslip
 
9.2
Wet / Dry Grip
 
9.0
Tread Mileage
 
8.7
FD758 tread detail
Key Features

Engineered
to endure

01
Tear Resistance

High-tear rubber compound and reinforced shoulder geometry resist cuts and tears from gravel, broken pavement, and curb impacts. Casing integrity preserved through full service life.

02
Heavy Load Endurance

Reinforced bead bundles and high-modulus sidewall plies handle sustained heavy-load cycling without sidewall fatigue. Engineered for fully-loaded daily duty.

03
Anti-Sideslip Stability

Optimized tread block geometry and multi-directional siping prevent lateral slip under cornering load. Stable handling on wet pavement and during emergency maneuvers.

04
Low Noise

Pitch-sequenced tread pattern and laser-cut groove geometry minimize pattern noise at cruising speed. Quieter cabin, reduced driver fatigue, compliance with regional noise regulations.

01 / 04
Tear ResistanceTear Resistance
Heavy Load EnduranceHeavy Load Endurance
Anti-Sideslip StabilityAnti-Sideslip Stability
Low NoiseLow Noise
Where It Performs

Anywhere a
medium-haul route goes

Regional Distribution
/ Regional
Regional Distribution

Daily routes alternating between highway cruising and urban delivery — stop-and-go traffic interleaved with sustained stretches.

Mixed Pavement
/ Mixed Road
Mixed Pavement

Pavement quality varies from new asphalt to patched secondary roads. Tire must absorb the variance without uneven wear.

Short-Distance Duty
/ Short-Haul
Short-Distance Duty

Frequent stops, repeated load cycling, urban-fringe distribution routes. Casing must withstand the constant flex.

Downloads

Spec Sheets
& Catalogs

FA808 Product Spec Sheet
PDF
FA808 High-Res Product Images
ZIP
FRIDERIC 2025 Full Catalog
PDF
Common Questions

Before you order

FA808 is engineered for short and medium-distance trucks on regional all-position duty across 15 sizes, specifically optimized for the All-Position position.
7.00R16LT (PR14) — load index 118/114, Speed L (120 km/h); 7.50R16LT (PR14) — load index 122/118, Speed M (130 km/h); 8.25R16LT (PR16) — load index 128/124, Speed M (130 km/h). Additional sizes available — see the specs table. Always observe local axle-load and speed regulations.
Field data indicates 85,000–115,000 km on typical regional and short-haul routes. Mileage varies significantly with road severity, axle alignment, and inflation discipline. Smoother routes will see the upper end; severe routes sit lower.
The FA808 is not optimized for long-distance highway service. For that, we recommend FA131 (for long-haul steer) or FD758 (for mining drive), which delivers better performance on those routes.
CCC (China), DOT (USA), ECE R117 (EU), INMETRO (Brazil), GSO/GCC (Gulf), SNI (Indonesia), BIS (India), and SASO (Saudi Arabia). Contact our sales team for the certification list applicable to your destination market.
Standard MOQ is 1×40HQ container (approx. 220 pcs for 12R22.5). Lead time for stock sizes is 25–35 days FOB Qingdao; OEM/private-label and non-stock specs require 50–60 days. Custom sidewall branding available from 1000 pcs.
Get a Quote

Ready to spec
the FA808?

Export team responds within one business day
FOB Qingdao · 25–35 days lead time
MOQ from 1×40HQ container
10+ international certifications available